How to Shower With a Cast?


Created At 1 year ago



Casts are frequently used to support and protect an injured limb while heals, most commonly a broken bone. To guarantee a quick and efficient recovery, you must take care of your cast. The most excellent strategy to aid healing is to keep your cast clean and dry. It’s critical that you keep showering and bathing to avoid infection, which is more difficult with a cast.

Showering with a cast varies depending on the type of cast and where it is on your body. We’ll answer the most often asked cast and shower-related issues in this month’s guidance piece, such as whether it’s okay to get a cast wet and how to shower with a cast on different parts of your body. If you’ve recently received a cast, you’ve probably been cautioned not to get it wet. Accidents sometimes happen, and it’s critical to understand the repercussions and the steps you should take next.








What happens if your cast gets wet?

Moisture trap inside your cast if the padding gets wet, which might create serious complications. A damp cast might soften over time and fail to keep your bones in place for optimal healing. Skin irritation, infections, and even permanent scars are other issues to be concerned about. Even if your cast looks to be dry on the outside, you should contact your healthcare professional to see if your cast needs to be checked or replaced.

You should try to prevent getting your cast wet in the first place if at all possible. Casts help in the healing of an injured limb or shattered bone. It also acts as a safeguard to ensure a quick and effective recovery. If you’re wearing a cast, keep it clean and dry to speed up the healing process.

Most people would advise you to avoid getting it wet at all times, which is why jumping in the shower might be difficult. The main purpose of your cast is to immobilize the wounded location so that it heals faster, but getting it wet will weaken it. The cast will lose its effectiveness as it softens and loosens.

Furthermore, damp casts can cause skin irritation, resulting in severe itching, mildew, infections, and skin damage. If the cast becomes too moist, you’ll need to replace it, which can be a costly repair. A lot goes through your head when you first get a cast. As you learn to walk, eat, and commute with your cast, you may feel awkward and self-conscious. What about the shower, though? On the other hand, getting your cast wet will result in a stench, an infection, and an expensive repair.

How to Take Bath with Wearing Cast?

Fortunately, there is a variety of different elegant and durable options for keeping your fracture dry. It’s ideal not to submerge the cast in water, so avoid baths if at all possible. Regardless of whether you prefer a clawfoot tub or a red summer hydrant, we’ll show you how to shower with a cast.

If you’ve broken a bone, you’re probably wearing a cast and facing the difficult task of bathing or showering while keeping your cast dry. Here are some suggestions for keeping your cast dry while also keeping yourself clean.

Showering while holding the cast out of the way is a bad idea. Water will indeed run down your arm or leg, saturating the padding in the cast. Find something to cover your cast, even if you plan on keeping it out of the water’s path. Wet casts can lead to various issues, including foul odors, skin irritation, and discomfort.

Make Your Shower Wraps

Any plastic sheeting can be repurposed. It involves the use of plastic wrap (sometimes called cling film). It’s simple to wrap this stretchable food-grade plastic around a cast. You can also use plastic that isn’t stretchable. Start by looking around the house to see what you have on hand that could be used as a substitute.

Bread bags, rubbish bags, cellophane, and any other type of plastic wrapping are examples. These plastic wrappers are easy to find in your kitchen and bathroom. You can also reuse the packaging from beauty products. It’s best to use see-through plastic because it’s easier to see a leak.

The right size plastic bag to cover your cast is commonly a newspaper bag. Bread bags or small rubbish bags are also acceptable possibilities. Tape or a rubber band is used to seal the tops of these.

Wrapping Plastic:

Plastic Cling Wrap

A cast can be wrapped with plastic wrap, but it must be tightly wrapped. Take extra precautions to ensure a good seal around the cast’s top. Although this procedure may leave holes where water might sneak in, it is a cheap and straightforward way to cover the cast. A rubber band present around the top of the cast can assist keep the seal from leaking. Again, don’t submerge the cast in water; the seal might not be as tight as you’d like.

Covers for Casts:

Sleeves manufactured expressly to cover your cast are available from several firms. A pump is often included in the sleeves, which suctions air out from behind the cover, making a tight seal against the arm or leg.

Covers for Casts

Cast covers exist in a variety of sizes and appear to perform well. They’re a lot more resilient than other options, so they’re less prone to tear. Even when wholly buried underwater, these should remain dry. While it may appear to be a higher price than a simple plastic bag, they are considerably more durable and are more likely to keep all of the water out!

Related: How to Remove Shower Handles?

Material for the Waterproof Cast:

Some cast materials are designed to endure being submerged in water. While these do not make the cast completely waterproof, they can survive being wet without causing damage. These water-resistant materials are ideal for children, especially during the summer.

There are various waterproof cast materials available, some of which appear to function better than others. Even if their cast is waterproof, some people prefer to use a cover. Avoid getting the cast wet too often since the material can resist being wet, and it can take a long time or even more to dry thoroughly.

Strong tape:

Your doctor’s choice and the body part you’ve hurt will determine whether you get a cast or a splint. So, some form of pliable waterproof material is likely to be used to keep the cast dry. However, it is maintained in place, which necessitates the use of waterproof, skin-safe tape.

Strong tape

Duct tape is fantastic if you can keep it away from your flesh. Better to use medical tape. Because horse tape is self-adhesive, it’s a good option. It’s available at any veterinarian’s office, as well as some hardware stores. Regular craft tape isn’t recommended because it becomes less adhesive when wet.

Stretch the Restraints:

Water can get through any cracks or scratches in plastic tape, and moisture can get in. In addition, if you have hard water and don’t utilize a shower filter, limescale and chemical residue may harm the plastic. Rubber bands are used to keep your plastic cast cover in place in this case.

Makeshift elastic bands are used from old toys, children’s clothing, or scrunchies. String, shoelaces, or fabric pieces ripped from old rags could be used as a last option to keep the plastic bag in place. Make sure the knot supports the plastic in an area without obstructing circulation.

Secure seats:

Arms and legs are the most common casts. If your cast is on another area of your body, you’ll most likely require a bath-time nurse to help you with sponge baths. If it’s on your arm or leg, grip bars and a shower seat should suffice. Place a stable stool or waterproof chair in the bathroom as an alternative.

shower chair

However, because a cast can last up to 6 weeks, it’s worth investing in a dedicated shower chair. This temporary chair should have non-slip solid feet. They’re made with increased grip to keep them from slipping on tubs or tiles. They also include a plush seat cushion.

Vet gloves:

You might find options at your local medical supply store that you hadn’t considered before. Begin by asking for a pair of OB/GYN or Vet Gloves at your local pet store. They’re disposable and long-sleeved, and they’re for medical reasons. They’ll extend to your shoulder and stay dry if you tape them in place.

vet gloves

Field Gloves are also available for purchase. They resemble Vet Gloves in appearance but are frequently colorful and have elasticized hems. However, until it’s harvest season, you won’t always be able to find them. Also, while these choices are helpful for protecting your fingers, they are useless if your cast is on your foot.

Suction Devices:

You’ll need something like a Shower Boot in that instance. It has self-adhesive horse tape attached to its upper end and is large enough to slip over the prosthesis. If you’re ready to invest a little extra, a suction-based product like Seal Tight is an option. It’s a non-latex product. Therefore, it’s allergy friendly.

Seal Tight is a polyvinyl bag with a non-latex sealing ring on top. The diaphragm seals your skin, keeping water and air out while allowing your leg cast to breathe. It can be reused as long as the diaphragm retains its flexibility and the bag is not perforated, so keep an eye on it!

Sealing with a vacuum:

Assume you’re devoted to your rain showerhead and require further waterproofing. Because the water sprays over a bigger surface with more giant showerheads, it’s more difficult to stay dry. In such instances, DryPro is a good option. It’s a cast and wound cover that keeps your dressings from getting wet.

DryPro creates a vacuum seal around your cast with the help of a pump, and it’s made to fit your arm, leg, or waist while swimming or showering. There is no need or require for tape because the vacuum seal grips your skin. For added safety, the leg-specific models have non-slip textured bottoms.

Related: How To Remove Shower Drain Cover?

Replace the Shower Head:

Because your cast will be in place for at least six weeks, it’s worth investing in a flexible showerhead. This durable handheld shower faucet will make it easier to maneuver, especially if grab bars and a shower chair have also been installed. It can keep your injured limb dry while also elevating your bathroom’s style status. Install it with care so that it does not obstruct your shower door.

Positioning with Care:

Keep the cast out of the water as much as possible, regardless of how tight your tape and plastic are. Hang your cast over the tub’s side if you’re soaking in the tub. Alternatively, place it on a bench, plank, or lip to raise it. Keep your cast out of the direct stream of water when taking a shower.

Also, be cautious when exiting the tub. Droplets of water will frequently fall back down your arm or leg. Even if your cast has been drying throughout your bath or shower, this moisture could sleep under it! Dry your arm or leg and keep it up when you exit the tub or shower to avoid this. Water will drip away from the cast instead of seeking to go underneath it.

It’s Hot and Dry:

The first and the most important thing to remember is to keep your cast dry. You could get an infection if it gets even a few droplets. Maintain a cast that is higher than your heart. It decreases swelling and prevents water from re-entering the cast.




Latest Posts

Amazon Affiliate Disclosure

As an Amazon Associate, I earn from qualifying purchases.

Some posts may contain affiliate links. is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for website owners to earn advertising fees by advertising and linking to Amazon(.com,, .ca etc) and any other website that may be affiliated with Amazon Service LLC Associates Program.