How To Remove Shower Drain Cover?

How To Remove Shower Drain Cover?

You’re most likely reading this because you’re sick of standing in a pool of filthy, soapy water every time you shower. The problem is, a clogged bathtub drain is just revolting. That’s why we’ve put together a step-by-step guide on how to remove shower drain cover and clear the drain. If you’re weary of standing in dirty, soapy water every time you bathe or waiting for a slowly draining tub after washing the kids at night, remove your shower drain cover to shine some light on things and clear obstructions the permanent way.

A shower drain cover helps prevent loose jewelry, hair clips, bathroom razor blades, and shampoo caps from falling down the drain. However, they aren’t very effective at stopping hair growth. Hair builds inside the drain over time, resulting in a clogged drain. The water ultimately slows down due to the obstruction. When this occurs, remove the lid and clean out the debris that created the clogged drain.

Shower drain covers are essential features of a bathroom while being sometimes disregarded. They not only prevent you from losing jewelry down the drain when you forget to take it off during a shower, but they also separate the drainage pipe and shower enclosure, preventing heavy debris from clogging the drain and causing further plumbing disasters.

It’s lovely to have the option of having someone else handle it for you when trouble arises. The main problem is that you can’t afford to hire a mechanic, a plumber, an electrician, or any other home-improvement expert every time something goes wrong. You can take the initiative and learn how to remove the shower drain cover on your own, ensuring that you never have to worry about clogging again. It’s easy and quick to do.

Know the Different Types of Showers Drain Covers

When it comes to removing a shower drain cover, the first step is to look at how it is attached. The majority of shower drain covers are secured with a single screw in the center or two screws along the borders. On the other hand, some shower drains are not screwed together; instead, metal flanges are employed, which allow the drain cover to pop in and out of place.

That being said, here are some important of the most common shower drain covers on the market – I’m sure yours fits one of the criteria below:

Screw In:

One of the most prevalent varieties of shower drain covers is the screw-in variety. They look like a flat or slightly concave (and, in some cases, convex) strainer that you could use for brewing tea, and they’re easy to remove.

To remove it, unscrew the screws that keep it in place with a flat or Phillips head screwdriver. The two screws are located along the drain cover’s edges or situated in the center. ​

Lift and Turn:

Before we proceed any further, double-check that you have a lift-and-turn drain cover. Many individuals confuse the push/pull variety with the push/pull variety. Next, make sure the cover is open since this will allow you to see if there is a screw holding the stopper in place.

If not, crank it counter-clockwise, and it should come off without difficulty. If you notice a screw, loosen it slightly (there’s no need to unscrew it) – this should be enough to remove the stopper. Before you start digging, please double-check that you didn’t get it mixed up with a lift and turn shower drain cover.

After that, unscrew the top knob by turning it counter-clockwise (using pliers and a rag to avoid scratching it) while keeping the stopper in place. You should be able to lift the plug by unscrewing the brass piece beneath it with a flathead screwdriver.

Read also: Best Bath Soap for Sensitive Skin

Pop Up:

The majority of these shower drain covers are simple to remove, requiring only a straight up and off pulling motion. Others may require some wiggle back and forth, but the principle remains the same. Shower drain covers with a rocker arm, on the other hand, must be taken up straight to reveal the connecting arm before being pulled away horizontally.

Flip-It is a game in which you have to flip a coin. Hold the corpse and rotate it gently while pulling it free from the drain. That’s all there is to it! Okay, this one is by far the easiest to remove — you won’t even need any tools for it.

Toe Touch:

Finally, you may have a toe-touch shower drain cover, which opens and closes with the push of a toe. They may appear challenging to remove, but most can be unscrewed by rotating them counterclockwise while in the open position. If not, there’s a threaded, flathead screwdriver slot where you can remove the complete mechanism.

Things You Need When Removing a Shower Drain Cover

Make sure you have a screwdriver suitable for No. 2 Phillips screws, a flathead screwdriver, plenty of oil, and a tiny cup to keep the screws in if they become dislodged for shower drain covers that are fastened by screws. If there are no visible or elegant screws on your shower drain cover, you’ll need needle-nose pliers, lubrication, and a putty knife.

There are a few important and basic things you should keep in mind:

With Screws Drain Cover

Screws most likely used to attach the shower drain covers, which will most likely be No. 2 Phillips screws. All you’ll need is a simple screwdriver to get rid of them. If the screw is stuck, apply pressure to the top end of the screwdriver’s handle with your palm while turning it with your other hand. You can also use a lot of lubrication or a penetrating catalyst to force it out of its hiding location. After removing the screws, place them in a bit of a cup to prevent them from falling out.

After removing the screws, pry the lid open by pushing down on the screwdriver handle while inserting the screwdriver’s tip through an aperture near the rim. It should provide you with a giant hole, and if there is a clog underneath, you can swiftly scrape it off with a putty knife.

Don’t worry if the lid doesn’t come up as soon as you’d like; you may loosen it using a flathead screwdriver and a hammer by tapping around the rim. When it’s loose, pull it away from the drain with the screwdriver.

Read also: Best Baby Bath Towels

Without Screws Drain Cover:

If no visible screws or other supports hold your shower drain cover in place, it’s a “snap-on” cover. These drain covers are most likely secured in place with silicone adhesive, so pulling them out will require considerable force. Again, there’s no need to fear because you can accomplish it on your own quite quickly:

First, lubricate the drain cover’s lip with a lubricant spray. Allow the lubricant to settle in by being patient and leaving it for a few minutes. After that, slip a pair of needle-nose pliers into one of the drain cover’s openings. Hold the pliers solidly in both hands – one hand per grip – and twist to the left with both hands. As long as you exert consistent force, the adhesive will finally loosen.

If the lid does not loosen, different lubricants may be required. Be persistent in squirting the drain with a lot of water. Once the cover has been removed, flush any debris down the drain pipe and scrape away any soap scum or rust around the perimeter of the shower drain cover with a flathead screwdriver.

Cleaning the Obstructed Shower Drain:

Remove the drain cover and look down into the drain using a flashlight. Check to see if there are any large objects in the drain. If the hair buildup is the cause of the clogged drain, reach down inside and take the hair out. When pulling out all of the hair, make sure to use gloves. It’ll be slimy and slippery.

Use a snake to remove any hair stuck deeper down inside the clogged shower drain and is out of reach. You can use a wire hanger. Completely untwist the wire hanger. With needle-nose pliers, bend the straight end of the wire into a bit of hook. Insert the snake into the clogged drain, looking down into it with a flashlight to catch any hair or debris. Pull it out of the drain once it’s hooked. Repeat the procedure as needed until all hair and debris have been removed.

Here are some other options to consider:

Plunge With an Old-School Plunger:

Maybe the blockage is in a place you can’t reach, so you’ll need some extra assistance to get things moving again. That’s where the old plunger comes in handy: fill your shower with one or two inches of water and vigorously pump the plunger a few times before checking the draining capacity. Repeat the process three times or four times if necessary.

Baking Soda and Vinegar

Chemical-based drain cleaners may be the first thing that springs to mind but try this non-toxic technique. All you need is an accurate amount of a quarter cup of baking soda and a cup of white vinegar. Allow 20 minutes for the combination to rest in your drain before flushing it out with a pot of boiling water.

Related: How to Clean a Shower Head With Baking Soda?

Drain Unclogging Tools Could Be Beneficial

If all the methods fail, you may need to go to your local home improvement store and get these cheap but effective drain clog removing equipment. The best thing you have to do is add it down the drain from various angles, and a bit of the gnarly hair and soap build-up should resurface from the drain every time you draw it up.

Replace the shower drain cover

Replace the shower drain cover after the clogged shower drain is clear and running freely again. Apply silicone caulk around the edge and secure it in place. If it’s a snap-on lid, replace the screw or snap it back on and twist it correctly. Allow the caulk to cure before resuming the use of the shower.

If you don’t feel comfortable removing your shower drain cover or drainage issues linger after cleaning the shower drain, call a plumber. If the water is still draining slowly, the obstruction is likely much further down the line and will require professional-grade tools to remove.

Conclusion:

Do you feel more in control of your home now that you’ve discovered all these do-it-yourself strategies for removing your shower drain cover? These brief ideas are simple and easy to implement, whether you are a stay-at-home parent, a granny, or a youngster. Those days are eventually long Gone when you had to spend your hard-earned money to make your home comfortable; now, you can bring comfort in yourself.

Remember that ignoring the little things that matter can have a significant impact on our comfort and convenience, as well as our entire day! Take the reins and rule the roost! Don’t let minor hiccups get the best of you. You might want or need to invest in a shower drain hair catcher to prevent future drain monsters from multiplying. These affordable gadgets aren’t compatible with every model of the drain cover, but for those that are, they can avoid bothersome and perhaps costly clogs in hard-to-reach regions of your plumbing system.

FAQs

Without screws or tools, how do you remove a shower drain cover?

If there isn’t a screw, remove it by turning it counterclockwise. If a bit of screw is visible, loosen it with a flathead or Allen wrench until the stopper must be removed (not entirely). Some pop-up drain covers are easily removed by pulling straight up. Others must be wiggled from side to side.

Is it possible to remove the shower drain covers?

It Depends on the type of shower drain cover, and there may be an easy remedy. One of the most prevalent drain covers is the pop-up drain cover. They can be pulled right off, although some may need to be wiggled loose. Drain covers that screw in resemble a strainer.

How can a shower drain be repaired without removing the pan?

Without removing the shower pan, here’s how to fix a leaky shower drain:

  • You should remove the drain cover.
  • Remove the compression gasket and throw it away.
  • Remove the body of the shower drain.
  • You can clean the drain’s rim.
  • Replace the gasket with the new one.
  • Install the replacement shower drain body and put it in place.
  • Remove any excess putty from the drain area.

What are the many showers drain types?

Shower Drains of Various Types According to the Toilet Zone, the three primary varieties of shower drains are single-piece drains, three-piece drains, and multi-piece drains. Because the construction is the same, a three-piece shower drain can also be utilized as a floor drain.

What plumbers use to unblock drains?

A motorized drain auger, often known as a drain snake, is the most common drain cleaner instrument used by plumbers to clear clogs in pipelines. An auger is a long, flexible metal coil that functions similarly to a corkscrew. The drill’s end is inserted into the drain until it reaches the obstruction.

Leave a Comment

Your email address will not be published.

Scroll to Top