The unattractive brown areas on your tub and your sinks are undoubtedly rust, and it’s produced for several different reasons. Rust is frequently caused by water passing through older, rusted, galvanized pipes. If you have hard water, rust might be produced by the residue of iron and minerals left behind on the surface. But, in the last, it doesn’t matter how the rust got there; what matters is that it looks horrible and needs to be cleaned up. Fortunately, removing these stains is relatively simple. Read this article to know how to remove rust from bathtub.
Showers are excellent, but if you’re not feeling well or are just plain exhausted after a long week, nothing can beat a lovely, peaceful soak in the tub. On the other hand, taking a bath could be unpleasant rather than relaxing if your tub has unattractive rust splotches under the faucet. Learn how to clean rust out of your bathtub. Bring the happiness back to bath time.
Rust stains are ugly, and they may make a clean sink or tub look filthy and neglected. If you’ve tried and failed to remove these stains in the past, you might think they’re permanent, but with our two-tiered strategy, rust stains can banish. Best of Bathing provides recommendations on rust stain removal using several do-it-yourself and commercial cleaners.
Rust stains can be difficult to remove and, over time, may become permanent. The following are some of the possible causes:
System of Plumbing
Rust particles can be found in your water supply due to a rusted or degraded water heater, fixtures, or pipelines. It is a health hazard, in addition to the damage to your house, that should be remedied as soon as possible by a skilled, certified plumber. Rusty pipes or a water heater will need to be replaced if they cause the problem.
Related: How To Unclog a Bathtub?
Availability of Water
If the iron level of the water entering your home is high enough, the water may appear and taste normal, but rust stains may emerge in locations where there is often standing water, such as the toilet bowl. Having your water tested or contacting a professional, certified plumber are two options. A softener or filter is indicated if iron deposits are abundant.
Getting Rid of Rust Stains
Remove rust with a rust remover: the material your surface is composed of (acrylic, porcelain, or enamel), as well as the length of time the discoloration has been there, will determine your effectiveness in eliminating rust stains. The color may have permanently etched itself into the porcelain in cases of chronic staining, making it impossible to remove. To avoid damage, perform a spot test in an inconspicuous location of the sink, tub, or toilet before attempting any of the methods described below.
The following are some options for removing rust stains:
This one is undoubtedly self-evident, and if you’ve spent any time in the cleaner aisle of your supermarket or hardware shop, you’re aware that there are a variety of solutions on the market that claim to remove rust on contact. It’s true: rust removers usually work well since they oxidize the rust without the need for scrubbing.
All you have to remove it out, and your sink or tub will be spotless. Many homeowners, however, are afraid to use professional rust removers because they include strong chemicals that produce unpleasant smells and might induce dizziness. If these products aren’t handled properly, they might cause skin burns. Furthermore, many individuals are looking for a more environmentally friendly way to clean their sinks and bathtubs. If this describes you, you should try a different approach.
Lemon and salt
This mixture may appear to do nothing more than turn your bathtub into a huge margarita-like drink. However, both lemon and salt have excellent cleaning properties, so you might be shocked by what they can do.
You’ll need the following items:
- a bottle of lemon juice or two to three halved lemons
- a cloth made of microfibre
Apply the lemon juice to any damaged areas. The stains must be wet for the salt to adhere to them. Over the rust-stained areas that you just soaked with lemon juice, sprinkle salt. Allow three to four hours for this to sit. Scrub the mixture away with the microfiber cloth gently. Rinse the tub walls to eliminate any rust, salt, or lemon residue.
Read also: How to Use Shower Steamers?
Use Shaw’s Pads:
Shaw’s Pads are an excellent, affordable, and ecologically responsible solution to clear stains on porcelain and ceramic surfaces if you don’t mind a little elbow work. Plumbers recommend these since they function well and do not scratch.
Make use of pumice:
Because it won’t scratch or damage your surface, an ordinary pumice stone is also an excellent technique to remove rust, especially from porcelain. Wet the stone, wet the rusted area, then lightly wipe the stone over the rusted area to eliminate the rust.
Baking soda and vinegar:
Make a paste with two more pantry staples: baking soda and one part vinegar for harder rust stains. Apply it with a scour sponge to the rusted area and let it sit for an hour. The rust should be gone when you rinse it off. However, you may need to repeat the technique for more severe stains.
We’ve listed the most effective methods for removing rust from a bathtub. All of these solutions are simple to implement and safe to use. If you want to learn more, read this post and quickly locate the perfect option for you.
Is it possible to remove rust from a bathtub using vinegar?
Baking soda and vinegar are good rust removers, but the acid in the vinegar can cause porcelain enamel bathtubs to deteriorate. If your bathtub isn’t composed of porcelain enamel, remove the rust with vinegar and baking soda solution.
What is the best and effective way to get rid of rust stains?
- Lemon juice or white vinegar, together with salt, should be applied to the stain.
- If possible, let the item air dry in the sun.
- Repeat the operation with cold water if necessary.
What can I do to get my tub white again?
One portion of white vinegar and three parts water is used to make a DIY version. To avoid soap scum build-up and discoloration, spray the mixture liberally over the surface of a clean tub or shower after each use.
Is vinegar effective at removing rust?
White vinegar uses to remove rust effectively. Rust interacts with vinegar and eventually disappears. To eliminate rust from a rusted metal object, soak it in white vinegar for a few hours and then wipe it clean. Alternatively, you can tap the thing with a towel dampened with white vinegar.
Is baking soda effective at removing rust?
On goods with mild rust stains, baking soda works wonderfully. It’s also great for products made of thin metal. Make a thick a paste-like thing with water and baking soda and rub it all over the metal, making sure rusty parts are fully covered.