How To Clean Fiberglass Bathtubs?

How To Clean Fiberglass Bathtubs?

Fiberglass bathtubs are simple to keep clean, but you must be cautious when washing them since they are susceptible to scratches. Fiberglass is one of the lightest and most cost-effective materials for bathroom tubs. Fiberglass is simple to clean. However, it can be scratched if nasty cleaning chemicals or techniques are used. Maintain your fiberglass tub regularly to keep it clean and gleaming.

Remove filth, grime, and soap scum from a fiberglass tub using affordable, everyday household items that will shine in your tub without irritating your skin or respiratory system. There are a few easy actions to clean fiberglass bathtubs.

Fiberglass tubs and shower-tub combos are lightweight and generally cheap, making them easy to install. The finish, on the other hand, is prone to scratching, cracking, and discoloration. Stains aren’t simple to remove, as you’ve learned. You’re not alone if you’re having trouble cleaning your fiberglass shower or tub correctly.

Best Ways to Clean Fiberglass Bathtub

Stains and scratches on your bathroom surfaces are caused by normal wear and tear, and they’re typically quite simple to remove. Fiberglass surfaces, on the other hand, are more challenging to sterilize due to their sensitivity. To keep your fiberglass bathtub or shower looking new, clean it, remove stains, and protect it.

Most individuals don’t want to spend their weekend scrubbing soap scum and hard water deposits out of their bathtub. If “clean a dirty bathtub” is on your to-do list, having the appropriate cleaning products can help you get the task done quickly. We know that soapy residue, rust and mildew stains, and hard water deposits collect in fiberglass bathtubs.

You may have that tub looking new in no time using a damp sponge or non-scratch cleaning pad and a dry towel. We can show you how to clean bathtub dirt in no time, depending on your chosen product.

Consider the following guidelines while cleaning a fiberglass bathtub:

Cleanings should be done regularly:

Choose or make your non-abrasive cleaning solution. Fill a bucket halfway with warm water and a spritz of liquid detergent for basic cleaning. If you believe you’ll have trouble cutting through tenacious filth and grime, add other soap to your bucket.

Non-Abrasive cleaners like dish and laundry detergents, domestic all-purpose cleaners, bathroom cleaners, or baking soda are good options. Abrasive cleaning chemicals, such as scouring powders, should be avoided since they might harm your fiberglass tub or shower. Use a non-abrasive applicator to apply the cleaning solution. Scrub the surface of your fiberglass shower or tub with a soft sponge dipped in a pail of warm soapy water.

a girl cleaning bathtub

Make sure your applicator is composed of nylon, polyester, or polyurethane if you aren’t using a soft sponge. Scouring pads, steel wool, and scrapers are not recommended since they are too harsh on fiberglass.

Related: How To Remove Hair from Bathtub Drain?

Using an Electric Scrubber:

You fully understand how difficult it is to clean tubs, especially those with rough bottoms. When it comes to textured bottom tubs, this is the key to making your life easier. An electric scrubber is required. That device made it possible to clean the tub, which was quite helpful. It’s also practical in general, as you can now clean the tub without bending.

Liquid Tub Cleanser:

You may use liquid bathtub cleaners for a moderate quantity of filth and to make the tub shine with scent. You may also use an organic bathtub cleaning if you’re using an electric scrubber. Fill your tub with water. The liquid cleaner should then be poured into the tub’s bottom and all around it. Then spread it out with the scrubber.

After you’ve finished cleaning:

  1. Give it a good and durable rinse with hot water.
  2. Remember to add some baking soda to the tub as “insurance” for gritty scrubbing power.
  3. Allow for 10 minutes of soak time. When you return, the cleaner will have broken down the soap scum, making it simpler to brush away.

Make Your Homemade Treatment:

Although ready-made cleaners are effective, you may manufacture your cleaner using everyday household items such as baking soda and dish soap. To begin, fill your tub with water. Then, generously apply dish soap to the tub floor, followed by a few pinches of baking soda. While the dish soap cuts the oil and dirt, the baking soda acts as a grit to help clean the textured bottom. After you’ve cleaned the solution, let it sit for a while and then wash it with hot water.

Read also: How To Plug a Bathtub Drain?

Use Baking Soda:

Regular bathroom cleansers might be brutal to remove soap scum after it has accumulated. A thick paste of baking soda product and water is a simple method that requires few materials. Apply the paste to the soap scum regions by mixing water and baking soda until it has a paste-like consistency. Allow the mixture to sit for a few hours before rinsing it off with warm water.

To dissolve obstinate soap scum, use an acid. More difficult soap scum may require the use of an acid, such as vinegar to dissolve it. Soak some part of the cloth in the vinegar and place it over the discolored area for about an hour for optimum results. Clean the specific area with warm soapy water and a gentle sponge after removing the cloth. More vital acids, such as diluted muriatic acid, should only be used as a last option while wearing rubber gloves.

Baking Soda and Vinegar

Hydrogen peroxide is used to bleach dark stains. Deeper, deeper colors may be difficult to remove using standard cleaning solutions. Cover the soiled area with many layers of clean white cloth and a layer of hydrogen peroxide. Allow the hydrogen peroxide to soak in overnight, then rinse and dry the site the following day.

Extreme stains are treated with acetone or paint thinners. Acetone, the primary component in nail polish remover, or paint thinners like turpentine, can be used to remove tough stains. Soak a clean and good-quality white cloth in the solution and gently massage the discolored area until the color returns to its original state. These solutions are OK to use on discolored fiberglass on occasion, but they should use rarely.

Use Dish Soap with Vinegar:

What could be a better method to clean tubs fast than with vinegar and dish soap? Pour some cleaning vinegar into the tub. Caulked edges should not use since the vinegar will tear them down. Open the ventilation of the bathroom. Allow the vinegar to remain for up to 10 minutes to dissolve any water stains or soap scum in the textured tub’s bottom. Then give the tub a quick rinse and scrape with dish soap to get the oil out.

Read also: How To Fix a Leaky Bathtub Faucet?

Conclusion:

You’ll discover a fantastic solution to cleaning your fiberglass tub with the textured bottom with these simple cleaning recommendations. An electric scrubber, such as this one from Amazon, is a must-have for cleaning textured tubs. Then you may use any bathtub detergent you choose, whether it’s commercial or homemade.

FAQs

What’s the best way to clean a fiberglass tub?

  • Fill a clean, empty spray container halfway with undiluted white vinegar.
  • Spray the whole surface of your tub, including cracks, crevices, and hardware.
  • Using vinegar, wet a cleaning sponge.
  • Sprinkle baking soda on the tub’s surfaces and gently scrape it in with a damp sponge.
  • To eliminate any leftover baking soda, thoroughly rinse the tub.

How can I restore the whiteness of my fiberglass tub?

The best solution is to use the cream of tartar and hydrogen peroxide; on the other hand, it can readily remove any stain and return the tub to its original white appearance. Dilute the hydrogen peroxide in the same amount of water as the hydrogen peroxide.  Allow the mixture to dry before applying it to the discolored area of the fiberglass bathtub.

What’s the best and effective way to clean a filthy fiberglass tub?

Before giving up on scrubbing the stains out:

  • Try the Home Depot cleaning method for stubborn stains on fiberglass: apply a paste of baking soda and water, then cover with a cloth soaked in vinegar.
  • Allow one hour before rubbing with a cloth or sponge.
  • Rinse.
  • Wipe with a clean microfiber towel once more.

How can I restore the appearance of my fiberglass tub?

Fill a spray bottle with 1 cup of water, 1 cup of vinegar, and one tablespoon of dish soap for weekly cleanings. Allow at least 15 minutes for this to dry after spraying it on the fiberglass surfaces. Rinse with clean water after gently scrubbing with a nonabrasive sponge.

On a fiberglass tub, what should you avoid using?

  • Showers made of gleaming fiberglass.
  • Bleach, in particular, should be avoided.
  • Scrubbers and abrasive pads should also be avoided.
  • Mild household acids such as vinegar and hydrogen peroxide can be used.
  • Mix your mild and good-quality acid with baking soda and dishwashing soap for abrasive effects.

Leave a Comment

Your email address will not be published.

Scroll to Top