How To Clean a Bathtub Using Bleach?

How To Clean a Bathtub Using Bleach

Bathtubs provide an ideal habitat for mold and mildew to grow, resulting in staining. For this reason, many commercial bathroom cleansers contain bleach. To remove mold, mildew, germs, and various stains from your bathtub, mix pure bleach with water. Bleach destroys mold and mildew while also lightening stains.

Nobody enjoys bathing in a filthy tub. Fortunately, a little bleach will bring your tub back to life. Bathtub stains are relatively frequent. We have bleach, which is fortunate for us. When it comes to removing stains off tub surfaces, bleach may work wonders. So, if you’re looking for the best and useful way to clean a bathtub using bleach, this article is for you.

There are various cleansers and solutions available, each with its potency, toxicity, and size. In the end, your selection or desire product will be based on how easy it is to clean, the cost, and the availability of chemicals.

bleach cleaners available in market

Facts Regarding Bleach

Bleach is a powerful cleaning agent. If not utilized appropriately, it can also be highly poisonous and dangerous. Many people would advise against using bleach because there are so many other options. However, bleach is unsurpassed in terms of simplicity of use and speed of cutting through virtually all dirt and muck compared to more natural treatments. Just be careful and well-prepared before utilizing it, or you could end up with more problems than a filthy bathtub.

bleach solution

Here are some facts regarding bleach and what it does for those of you who are not familiar with it. Using a powerful bleach solution to clean and stain-free that tub may appear to be a significant undertaking. But it isn’t the case. It simply takes a few easy steps, which we’ve provided for you.

Related: How To Remove Rust from Bathtub?

Instructions for Cleaning Bathtub with Bleach

You’ve come to the correct spot if you’re looking for instructions on how to clean a bathtub using bleach. After all, bleach is a strong but efficient cleanser that must be used cautiously.

The first and important step is to gather all required materials and cleaning supplies.

You’ll need the following items:

  • Bleach
  • Boiling water
  • Sponge
  • Gloves
  • Eye protection Mask
  • 1-gallon bucket for mopping
  • Microfiber cloth or paper towels

Step 1: Put on Appropriate Clothing

When cleaning your bathtub, it’s pretty simple to get bleach on your clothing, so wear clothes you don’t mind getting bleach on. Wear a pair of painter pants or an old pair of sweatpants to clean with a bleach solution if you have them. Bleach lightens your clothing when it comes into contact with them. As a result, bleach stains damage clothing.

Consider donning goggles or a mask if you have a filthy bathtub that you know you’ll be cleaning for an extended period. Bleach may be extremely hazardous if it gets into your eyes or mouth by mistake. It’s more likely to get on your skin or into your eyes the longer you’re exposed to it.

Step 2: Make Your Bathroom Ready

Before you use bleach to clean your filthy bathtub, make sure your bathroom windows and door are open. When clean with bleach, realize that it quickly becomes light-headed from the fumes that fail to open a window. Bleach is a strong chemical, so it’s vital not to breathe it in for lengthy periods, even if it’s an efficient cleanser.

Next, empty your bathtub of all items, including shampoo bottles, loofahs, and razors, and store them in a cupboard or another room. If you have a shower curtain, fold it over the curtain rod or remove it, so it doesn’t get in the way.

Step 3: Combine Bleach and Water in a Mixing Bowl

Cleaning with a bleach solution requires only a few simple components. Put 3/4 parts of water into a 1-gallon mop bucket. Because you’ll need room to add 1/4 cup of bleach gently, there’s no need to fill the whole gallon of water. You may dilute the bleach and water solution with more water if it’s too strong, or stop adding bleach if it’s too much.

Bleach should never use with ammonia or any other cleaning. It can produce a poisonous gas that is extremely dangerous. Bleach must be used alone, with no water added.

Read also: How To Clean Fiberglass Bathtubs?

Step 4: Put on Your Gloves and Get a Sponge

Put on gloves and grab a sponge before you start cleaning your bathtub with the water and bleach solution. Dip your sponge into your mop bucket and scrub the sides and bottom of your bathtub with the cleaning solution.

Pay careful attention to where the walls meet at the corners and where your bathtub’s rim begins. Those are the areas where soap scum, mold, or mildew are most likely to form. If you come across mold or mildew, scrape it away using the rough side of the damp sponge.

Continue cleaning with your damp sponge until your bathtub is spotless and your bleach mixture has been scraped into every crevice.

Step 5: Rinse and Pat Dry

After you’ve done cleaning your tub with bleach, fill it halfway with water. If you have a combined shower area and bathtub, you may rinse the walls and bathtub with your shower head. After you’ve finished rinsing, dry your bathtub with a white microfiber cloth or paper towels.


Although several disinfectants are available for cleaning your bathtub, bleach is one of the most potent cleansers available for killing bacteria and germs in your bathroom. If you’re attempting to get rid of mold or mildew, bleach comes in handy. Make careful to dilute it with water as well. When using bleach, remember to use cleaning gloves and eye protection.

A bleach odor may linger in your bathroom after cleaning. Still, you can generally eliminate it by leaving the bathroom windows open for a few hours after cleaning to allow the area to air out thoroughly. Hopefully, following this step-by-step advice will assist you in thoroughly cleaning your bathtub with bleach, paving the way for a spotless bathroom in the future.


Is it possible for bleach to harm a bathtub?

There are some materials that bleach may readily harm. If your bathtub has any amounts of iron, avoid using bleach since it will leave red streaks all over the surface that are difficult to remove.

How much bleach do I use in my bathtub to clean it?

Apply the solution to the bathroom surface by mixing 1/2 to 3/4 cup bleach with 1 gallon of water. Allow five minutes for the bleach solution to sit before rinsing and air drying.

Read also: Why Scrubbing Bubbles Automatic Shower Cleaner Starter Kit Discontinued?

What’s the most efficient technique to clean a clogged bathtub?

All tub surfaces dust with baking soda. Instead, use a tub-and-tile cleaner for very filthy tubs. Combine a half-gallon of hot water and two teaspoons of dish soap in a bucket. Scrub all bathtub surfaces with a scrub sponge or a stiff nylon brush dipped in the bucket.

Is it possible to keep bleach in the bathtub overnight?

It’s not a good idea to leave bleach in a bathtub overnight since it’s a potent chemical that might harm your tub. Leave it on for 6-10 minutes before rinsing.

How do you restore the color of a stained bathtub?

Make a decent paste with two parts baking soda and one part hydrogen peroxide thick enough to stick to the tub’s sides without running down. If the paste has to be thickened, add more baking soda as needed. Using a clean cloth, apply the paste to the spots. Apply the paste to the whole stain.

Leave a Comment

Your email address will not be published.

Scroll to Top